Welcome to the new Heckler website. Need help or want to share feedback? Use chat or the Feedback tab.

Heckler
Skip to guide content
Resource LibraryUser GuidesH1043

In this guide

H1043

Above Display Camera Mount for Heckler Mobile Fleet

Install the camera bracket and shelf above the display and organize the camera cables and power supply.
H1043 Above Display Camera Mount holding a video bar above the rear edge of a Mobile Fleet display.

This guide is also available as a printable PDF.

Letter PDFA4 PDF

In the box

  1. 1 x L bracket (R1019)
  2. 1 x Camera shelf (R1026)
  3. 2 x Cable manager (P118)
  4. 1 x Hook and loop strap (F856)
  5. 1 x L bracket mount screw (F243+P158)
  6. 1 x Camera shelf mount screw (F246+P160)
  7. 4 x M4 Thumbnuts (F838)
  8. 4 x M4 thumb screws (F839)
  9. 2 x L bracket mount nuts (F244+P159)
L bracket, camera shelf, cable managers, strap, mounting screws, thumb nuts, and thumb screws labeled a through i.

Install L bracket

Mount the long arm of the L bracket to the column in VESA 400 mode.

L bracket positioned on a stand column in the illustrated VESA 400 configuration.

Mount the short arm of the L bracket to the column in VESA 600 and 800 modes.

L bracket positions shown for the VESA 600 and VESA 800 configurations.

Use the mounting adapter and thumb nuts to attach the L bracket to the column.

Rear of a display with the L bracket and mounting adapter aligned on the stand column.
Mounting adapter posts passing through the column and L bracket toward two thumb nuts.
L bracket secured to the column with its mounting adapter and two thumb nuts.

Install the camera shelf

Mount the Rally Bar wall-mount bracket to the camera shelf using the included M4 hardware.

Rally Bar wall-mount bracket aligned with the camera shelf, with four M4 thumb screws and thumb nuts shown in an exploded view.
Rally Bar wall-mount bracket fastened to the camera shelf.

Install the camera shelf on the L bracket and fasten the thumb screw.

Camera shelf aligned above the L bracket, with its mounting thumb screw below.
Camera shelf seated on the L bracket and secured with its thumb screw.

Install Rally Bar to the wall mount bracket.

Rally Bar attached to its wall-mount bracket above the display.

Organize cable and power brick

Mount the power brick to the back of the camera shelf with the included Velcro strap.

Pop in the cable manager and organize cables along the L bracket.

Power adapter strapped behind the camera shelf and cables routed along the L bracket through cable managers.

When mounting the Rally camera

Rotate the camera shelf 90 degrees to mount the Rally camera.

Rally camera on the shelf rotated 90 degrees, with the mounting screw aligned horizontally through the L bracket.
Rally camera shelf fastened in its rotated position on the L bracket.