Welcome to the new Heckler website. Need help or want to share feedback? Use chat or the Feedback tab.

Heckler
Skip to guide content
Resource LibraryUser GuidesH1261

In this guide

H1261

Framework Rally Bar Mount

Install the Rally Bar bracket on the Framework beam and attach the camera.
H1261 Rally Bar mount holding a Rally Bar below two displays.

This guide is also available as a printable PDF.

Letter PDFA4 PDF

In the box

Included Rally Bar bracket, two mounting columns, camera screws and hex key, beam lock nuts, beam screws, and beam hex key, labeled a–g.
  1. 1 x Below Display Cam Mount, Rally (R1075-BG)
  2. 2 x Below Display Cam Mount, tube (R1074-BG)
  3. 2 x Camera Mounting screw (F956)
  4. 1 x Camera Mounting key (F776)
  5. 2 x Beam mounting lock nut (F289)
  6. 2 x Beam Mounting screw (F288)
  7. 1 x Beam mounting key (F535)

Remove the Framework Shelf and Front Panel.

Framework shelf lifted away from the center bay.
Front panel removed to expose the center bay and beam.

Fasten the short columns of the Rally Bar Mount to the beam with the provided hardware.

For structures with an odd number of bays.

Mounting-column position centered in a structure with an odd number of bays.

For structures with an even number of bays.

Mounting-column positions on either side of the center upright in a structure with an even number of bays.
Two short mounting columns positioned on the horizontal beam.
Exploded view of the beam screws aligned through the mounting columns and beam.
Lock nuts aligned with the rear ends of the mounting screws.
Lock nuts seated against the rear of the beam.
Hex key tightening a beam screw to secure the mounting column.

Connect cables to Rally Bar.

Power and signal cables connected to the rear of the Rally Bar.

Fasten Rally Bar to bracket.

Camera bracket aligned with the Rally Bar mounting points and fastened with screws and a hex key.
Rally Bar attached to its bracket with cables routed through the central opening.

Slide the camera bracket onto the columns.

Camera-bracket hooks aligned with the slots in the two mounting columns.
Camera bracket slid downward into the mounting-column slots.
Close-ups showing the bracket’s retaining features engaging fully with the mounting columns.

Reinstall the shelf.

Rear view of the mounted Rally Bar and routed cables with the shelf restored.
Completed Framework installation with the Rally Bar centered below the displays.