Welcome to the new Heckler website. Need help or want to share feedback? Use chat or the Feedback tab.

Heckler
Skip to guide content
Resource LibraryUser GuidesH1262

In this guide

H1262

Framework Rack Rails 2U

Fit the 2U rack rails to Framework legs and mount rack components.
H1262 C-shaped rack mount behind a Framework leg, holding one full-size 19-inch 2U component vertically.

This guide is also available as a printable PDF.

Letter PDFA4 PDF

In the box

Parts diagram labeled a and b: 2U rack-rail assembly and eight rack screws.
  1. 1 x 2RU Rack Mount
  2. 8 x Rack Mount Screw (F938)

Slide the Rack Rails 2U into the mounting slots on the back of the leg.

Rack rails aligned vertically behind a tall Framework leg.
Rack rails aligned vertically behind a short Framework leg.
Close-up shows the rail assembly positioned at the mounting slots on the back of the leg.
Rail assembly sliding down into the leg slots.
Rail assembly seated against the leg.
Close-up highlights the pre-attached cage nuts along the upper rack rail.

Fasten your components to the Rack Rails.

Rack component positioned between the rails, with enlarged details showing screws fastening its mounting ears.
Rack component fastened vertically behind the leg.

Mounting 2RU components to Rack Rails.

2U component fitted between the rails, with enlarged details showing its mounting screws and seated position.

Tall Leg example.

Tall-leg example with component cables routed to a Device Panel below.

Short Leg example.

Short-leg example with component cables routed along a Crossbar.