Zoom Rooms Console for iPad Mini 6th Generation

Included components labeled A–F: Zoom Rooms Console, Torx assembly tool, cable tie, cord anchor, AV Cart assembly screw, and right-angle USB-C adapter.

Exploded view showing the Torx assembly tool, removed screws, and the back cover and front bezel separated from the console.

Two cable ties routed through the holes in the console’s base plate, with the heads and tails extending upward.

USB-C cable routed through the highlighted side gap, with excess cable looped beneath the strap and an enlarged detail showing the two cable ties.

USB-C cable connected to the right-angle adapter at the side of the console, with the connection highlighted and excess cable looped beneath the central strap.

Excess cable looped beneath the overlapping strap inside the console, with two cable ties beside the loop.

iPad above the console support plate, with arrows pointing downward toward the plate and from the right-angle USB-C adapter toward the iPad’s side port.

Exploded view of the console and front bezel, with four screws aligned to the mounting posts and arrows showing placement and tool rotation.

Two cable ties around the cable at the console’s base plate, with excess cable looped beneath the strap and an enlarged detail of the short tie tails.

Underside view of the console, with the back cover aligned over the base, the cable passing through its notch, and two screws shown beside the assembly tool.

Rear view of the console on a tabletop, with its cable looped over the edge and a cord anchor and screw aligned beneath the table; an enlarged detail shows the anchor around the cable.