To reduce the risk of severe injury or death to persons, or damage to equipment, review these installation safety steps before proceeding:
1. A minimum of two people should install the display to the cart.
2. Caster brakes should be applied during the installation of the display.
3. Do not over-tighten the wingnuts when mounting the display.
4. Do not exceed 300 pounds of total display weight.
5. Whenever rolling the cart with a large display installed, two people should guide the cart to prevent wall and doorframe collisions, and tripping on sidewalk expansion joints.
If you have any questions, please contact Heckler.
service@hecklerdesign.com
844-432-5930
1. In the box
2. Assemble the cart base
3. Install the display
4. Install Rally Bar/Rally Bar Mini
5. Install Tap
6. Organize cables
or
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Parts: installation overview. Original installation illustration with its hardware labels and orientation details.
Heckler AV Cart Base
1 x Front Base
2 x Rear Leg
2 x Display Rail
4 x Caster
4 x Socket Head Screw, 1/2"-13, 2.75" Long
1 x Assembly Key, Hex, 3/8”
4 x Set Screw, M8, 70mm Long
4 x Wingnut, M8
4 x Set Screw, M6, 70mm Long
4 x Wingnut , M6
4 x Rubber Spacer
8 x Screw-in Cable Mount
4 x Push-in Cable Mount
8 x Pan Head Screw, 10-32, 0.25” Long
8 x Cable Tie
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: In the box: cart base. Original installation illustration with its hardware labels and orientation details.
H702 Device Panel
1 x Device Panel for Heckler AV Cart
1 x Camera Adapter
2 x Cart-mounting screws
2 x Cart-mounting thumb screws
4 x Device-mounting thumb screws
4 x Device-mounting thumb nuts
1 x Camera-mounting screw
1 x Camera-mounting key
1 x Cart-mounting assembly key
1 x Velcro for strapping devices. Two feet.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: In the box: device panel. Original installation illustration with its hardware labels and orientation details.
H709 Control Shelf
1 x Control Shelf for Heckler AV Cart
2 x Cart-mounting wingnuts
4 x Cart-mounting screws
1 x Cart-mounting assembly key
1 x Velcro for strapping devices. 12 inches
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: In the box: control shelf. Original installation illustration with its hardware labels and orientation details.
H711 Cart Mount for Logitech Rally Bar
1 x Cart Mount for Logitech Rally Bar
2 x Bracket-mounting thumb screws
2 x Bracket-mounting thumb nuts
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: In the box: H711 Cart Mount. Original installation illustration with its hardware labels and orientation details.
Remove the wheels from all four casters.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Remove wheels from all four casters. Original installation illustration with its hardware labels and orientation details.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Install all casters. Original installation illustration with its hardware labels and orientation details.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Reinstall caster wheels. Original installation illustration with its hardware labels and orientation details.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Engage all caster brakes. Original installation illustration with its hardware labels and orientation details.
Fasten Rear Legs to Front Base.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Fasten rear legs to the front base. Original installation illustration with its hardware labels and orientation details.
Fasten Display Rails to Front Base.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Fasten display rails to the front base. Original installation illustration with its hardware labels and orientation details.
Determine whether your display has M8 or M6 mounting holes.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Identify M8 or M6 display mounting holes. Original installation illustration with its hardware labels and orientation details.
Prepare the display-mounting hardware. Insert the M6 or M8 set screws through the rubber spacers. Position the set screw relative to the spacer as shown.
Important Notes: The set screws are a tight fit. To push the set screw into the spacer, place cardboard on a solid surface then slowly and carefully push the spacer onto the set screw.
1 inch(25mm)
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Prepare display mounting hardware. Original installation illustration with its hardware labels and orientation details.
Fasten the mounting hardware to the display.
Important notes: 1. Fasten the set screw into the display at the depth recommended by the display manufacturer. Do not over-tighten these mounting screws.
2. Ensure the spacers rest snuggly against the rear surface of the display.
3. The hex drive of each set screw should face away from the display.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Fasten mounting hardware to the display. Original installation illustration with its hardware labels and orientation details.
If your display feature a curved rear surface, the display likely shipped with special mounting spacers. If so, use the display manufacturer's mounting spacers rather than the spacers included with Heckler AV Cart Prime.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Use display-specific spacers for a curved rear surface. Original installation illustration with its hardware labels and orientation details.
Ensure all caster brakes are engaged.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Check all caster brakes. Original installation illustration with its hardware labels and orientation details.
Install the display to Display Rails by fastening wingnuts.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Install the display to the rails. Original installation illustration with its hardware labels and orientation details.
Install Tripp-lite power strip (not included).
T498
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Optional: install Tripp Lite power strip. Original installation illustration with its hardware labels and orientation details.
Mount Rally Bar/Rally Bar Mini above display.
Select your preferred mounting angle and install Cart Mount Bracket to the Device Panel.
OR
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Above display: select angle and install Cart Mount. Original installation illustration with its hardware labels and orientation details.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Above display: bracket installation details. Original installation illustration with its hardware labels and orientation details.
Pre-configure power adapter and wiring to Device Panel with Velcro strap included.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Above display: configure power and wiring. Original installation illustration with its hardware labels and orientation details.
Install Device Panel to Display Rails.
From H702 From H702 From H702
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Above display: install Device Panel to the rails. Original installation illustration with its hardware labels and orientation details.
Fasten Rally Bar to Cart Mount. Use the thumbscrews supplied with your Rally Bar tabletop stand.
Do not overtighten the thumbscrews.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Above display: fasten Rally Bar. Original installation illustration with its hardware labels and orientation details.
TIP: Accessing Control Panel Content
Remove the top two thumbscrews, then rotate the Device Panel.
Warning: Do not leave the cart unattended while the Device Panel is open to ensure stability and to avoid collisions.
continue to Mount Tap to Control Shelf .
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Above display: access Device Panel content. Original installation illustration with its hardware labels and orientation details.
Mount Rally Bar/Rally Bar Mini below display.
Install Cart Mount Bracket to the Device Panel.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Below display: install Cart Mount. Original installation illustration with its hardware labels and orientation details.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Below display: bracket installation details. Original installation illustration with its hardware labels and orientation details.
Pre-configure power adapter and wiring to Device Panel with Velcro strap included.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Below display: configure power and wiring. Original installation illustration with its hardware labels and orientation details.
Install Device Panel to Display Rails.
From H702 From H702 From H702
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Below display: install Device Panel to the rails. Original installation illustration with its hardware labels and orientation details.
Fasten Rally Bar to Cart Mount. Use the thumbscrews supplied with your Rally Bar tabletop stand.
Do not overtighten the thumbscrews.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Below display: fasten Rally Bar. Original installation illustration with its hardware labels and orientation details.
Mount Tap to Control Shelf, using the mounting screws included inside of Tap's underside panel.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Mount Tap to Control Shelf. Original installation illustration with its hardware labels and orientation details.
Decide Tap mounting angle.
Horizontal
Angled
Vertical
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Choose Tap mounting angle. Original installation illustration with its hardware labels and orientation details.
Install Control Shelf to Display Rails.
From H709 From H709 From H709
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Install Control Shelf to the rails. Original installation illustration with its hardware labels and orientation details.
Route power and data cables inside each Display Rail as shown.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Route cables inside the display rails. Original installation illustration with its hardware labels and orientation details.
Route power and data cables along the Rear Leg as shown.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Route cables along the rear leg. Original installation illustration with its hardware labels and orientation details.
Enlarge image ↗ H730 Heckler AV Cart for Logitech Rally Bar: Completed cart installation. Original installation illustration with its hardware labels and orientation details.
H730 - Heckler AV Cart for Logitech Rally Bar
Supports displays with a VESA 400 horizontal mounting pattern, and up to 300 pounds of total display weight. Recommended for use with 50-inch to 75-inch displays.
Designed & made in Arizona
Patented