Welcome to the new Heckler website. Need help or want to share feedback? Use chat or the Feedback tab.

Heckler
Skip to guide content
Resource LibraryUser GuidesH750

In this guide

H750 · iPad 10th Generation

WindFall Stand for iPad 10th Generation with PivotTable

Install the iPad in the WindFall Stand, route its cable, and fit the PivotTable hardware.
Front three-quarter view of an iPad fitted in the H750 WindFall Stand with PivotTable beneath its base.

This guide is also available as a printable PDF.

Letter PDFA4 PDF

In the box

  1. 1 x WindFall Stand
  2. 1 x Stand key, F529
  3. 1 x PivotTable key, F019
  4. 1 x PivotTable head, E115
  5. 1 x PivotTable screw, F859
  6. 1 x PivotTable disc, E104
  7. 1 x Double-sided foam disc, F129
  8. 1 x Single-sided foam disc, F132
Landscape WindFall stand, two hex keys, PivotTable head and screw, circular PivotTable disc, and two foam discs, labeled a through h.

Remove the brackets

Hex key at a retaining-bracket screw on the rear of the landscape stand.
Two retaining brackets lifted away from the landscape frame, with outward arrows.

Position your iPad 10th Generation

An iPad lowers into the landscape frame behind the front bezel.

Reinstall the brackets and route your USB-C cable

Rear view of the brackets over the iPad and the USB-C cable routed through the bracket opening and stand base.
Close-up of a right-angle USB-C connector behind the bezel at the side of the iPad.

Tighten all screws

A hex key engages one of the four retaining-bracket screws behind the iPad.
Secured retaining brackets and the USB-C cable bending through the open bracket area.

Install PivotTable

Exploded view of the PivotTable disc under the stand base, with its head and screw above the central opening.
The PivotTable disc fitted beneath the stand base and its head seated in the central opening.

Adhere your preferred PivotTable foam disc

Backing peeled from a foam disc before it is pressed beneath the PivotTable.
The landscape stand shown in two countertop positions, with an arrow indicating movement.
Circular foam disc aligned beneath the PivotTable with the adhesive backing peeled away.
The stand pressed downward onto the countertop after the foam backing is removed.

Use a Kensington ClickSafe Cable Lock

A cable lock attached to the security fitting at the stand base.
H750 iPad 10th Gen WindFall Stand with PivotTable Installation Guide | Heckler