User guide

H759 Stand Portrait for iPad 10th Generation with PivotTable

Read guide

PDF · Letter PDF · A4

Guide details Applicability and revision

Install the iPad in the portrait stand and fit the PivotTable hardware and foam disc.

ProductH759

Hardware generationH759 · iPad 10th Generation

Guide revisionrelease-2026-10-28

Applies to

H759 Stand Portrait for iPad 10th Generation with PivotTable.

In this guide · 7 sections

In the box

a. 1 x Portrait Stand

b. 1 x Stand key, F529 c. 1 x PivotTable key, F019 d. 1 x PivotTable head, E115 e. 1 x PivotTable screw, F859 f. 1 x PivotTable disc, E104 g. 1 x Double-sided foam disc, F129 h. 1 x Single-sided foam disc, F132

Portrait iPad stand, two hex keys, PivotTable head and screw, circular PivotTable disc, and two foam discs, labeled a through h.

Remove the brackets

Rear view of the portrait stand with a hex key at one of four retaining-bracket screws.

The two retaining brackets lifted away from the rear of the portrait stand, with outward arrows.

Position your iPad 10th Generation

An iPad lowers into the portrait frame with its USB-C cable routed through the stand base.

Reinstall the brackets and tighten all screws

Two retaining brackets aligned over the rear of the iPad, with four screws at their ends.

Rear view of the fitted brackets and USB-C cable passing through the stand base.

Install PivotTable

Exploded view of the PivotTable disc below the stand base and its head and screw above the central opening.

The PivotTable disc fitted beneath the portrait stand, with the head seated in the base opening.

Adhere your preferred PivotTable foam disc

Backing peeled from a circular foam disc before it is pressed onto the underside of the PivotTable.

The portrait stand shown in two countertop positions, with an arrow indicating movement.

Foam disc aligned with the underside of the PivotTable, with its adhesive backing peeled away.

Adhesive backing removed from the foam disc and a downward arrow showing the stand pressed onto the countertop.

Use a Kensington ClickSafe Cable Lock

A cable lock connected to the security fitting at the stand base.